Introduction
In many industries, some large-scale equipment is used to complete various tasks, such as office buildings, shopping malls, chemical industry, metallurgy and many other commercial and industrial scenarios; these equipment will generate high temperature during operation and generate a lot of heat. If the heat cannot be dissipated in time, the working efficiency and service life of the equipment will be affected, and even failure will cause the equipment to stop working;
In solving the problem of high temperature during equipment operation, industrial chillers are indispensable control equipment in many industries, and the air-cooled scroll chiller is one of the chillers. Next, this article will share with you all the information about the air-cooled scroll chiller.
Air Cooled Scroll Chiller Working Principle
The working process of the Air-Cooled Scroll Water Cooler will produce a "thermodynamic" process to achieve the cooling effect on equipment and machines; compared with other types of water coolers, the air-cooled scroll water cooler has higher heat dissipation efficiency and better stability and reliability. Air Cooled Scroll Chiller Working Principle mainly includes the following steps:
● Evaporator: The working principle of the air-cooled scroll water chiller is to use the evaporator as a heat exchanger to collect the heat generated by the equipment, and transfer the heat to the refrigerant of the chiller to make the refrigerant boil, so as to convert the low-pressure liquid into a low-pressure gas
● Compressor: After waiting for the low-pressure gas to enter the compressor, its main task is to increase the pressure of the discharged refrigerant vapor to a certain high temperature and release heat in the condenser
● Condenser: In the condenser, the refrigerant vapor returns to the liquid, and the environmental quality or calorific value of the condensed water taken away during the conversion from vapor to liquid mainly depends on whether you are using an air-cooled chiller or a water-cooled chiller
● Expansion valve: In the last part of the refrigeration process, the liquid refrigerant enters the expansion valve and is measured before entering the evaporator, again achieving the effect of repeating the refrigeration cycle.
Technical Parameters
|
MODEL |
LSFX9 (3HP) |
LSFX13 (5HP) |
LSFX16 (6HP) |
LSFX22 (8HP) |
LSFX28 (10HP) |
LSFX32 (12HP) |
LSFX41 (15HP) |
LSFX55 (20HP) |
LSFX65 (25HP) |
LSFX84 (30HP) |
LSFX105 (40HP) |
|||
|
Performance |
Cooling capacity |
kW |
8.8 |
13 |
15.4 |
22 |
28 |
32.7 |
41.1 |
55.3 |
65.4 |
84.8 |
105 |
|
|
×103 kcal/h |
7.6 |
11.2 |
13.2 |
18.9 |
24 |
28.1 |
35.4 |
47.6 |
56.3 |
73 |
90.5 |
|||
|
Machine power |
KW |
3.3 |
4.92 |
5.55 |
7.6 |
9.58 |
11.3 |
15.8 |
19.35 |
23.25 |
29.7 |
30.6 |
||
|
Opertation current |
A |
6 |
8.9 |
10 |
13.8 |
17.4 |
20.6 |
28.8 |
35.2 |
42.3 |
54.1 |
65 |
||
|
Compressor |
QTY |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
1 |
2 |
4 |
||
|
Rated power |
kW |
2.43 |
4 |
4.64 |
6.12 |
8 |
9.3 |
12.8 |
15.3 |
19.2 |
24.5 |
24 |
||
|
Rated current |
A |
4.46 |
7.37 |
8.5 |
11.25 |
14.8 |
17 |
24.3 |
26.9 |
33.8 |
48 |
59.2 |
||
|
Evaporator |
Type |
- |
Water tank + Coil Pipe |
Shell and tube |
||||||||||
|
Pipe Interface |
mm |
DN25 |
DN25 |
DN25 |
DN32 |
DN32 |
DN40 |
DN40 |
DN50 |
DN50 |
DN50 |
DN65 |
||
|
Water flow |
m3/h |
1.5 |
2.3 |
2.65 |
3.8 |
4.8 |
5.62 |
7.1 |
9.5 |
11.2 |
14.6 |
18 |
||
|
Condenser Fan |
Type |
- |
Axial-flow |
|||||||||||
|
Input power |
KW |
0.5 |
0.36 |
0.36 |
0.74 |
0.83 |
1 |
1.5 |
2.2 |
2.2 |
3 |
4.4 |
||
|
Water Pump |
Input power |
KW |
0.37 |
0.55 |
0.55 |
0.75 |
0.75 |
1 |
1.5 |
1.85 |
1.85 |
2.2 |
2.2 |
|
|
Head |
m |
16 |
23 |
28 |
22 |
24 |
26 |
23 |
26 |
26 |
28 |
26 |
||
|
Tank Volume |
L |
76 |
76 |
76 |
131 |
131 |
131 |
220 |
280 |
280 |
/ |
/ |
||
|
Overall Dimension |
Length mm |
1150 |
1300 |
1300 |
1500 |
1500 |
1500 |
1700 |
2100 |
2300 |
2380 |
2500 |
||
|
Width mm |
560 |
680 |
680 |
860 |
860 |
860 |
1000 |
1000 |
1000 |
1050 |
1200 |
|||
|
Height mm |
1320 |
1335 |
1335 |
1535 |
1535 |
1535 |
1850 |
1940 |
2000 |
2000 |
2350 |
|||
|
Net Weight |
KG |
150 |
280 |
300 |
430 |
440 |
450 |
600 |
750 |
950 |
1150 |
1400 |
||
Application
Large-scale industrial equipment: injection molding machines, laser cutting machines and other scenarios used in various manufacturing industries. These equipment will generate a lot of heat during operation. The vortex chiller can quickly transfer the heat generated by the equipment to ensure its normal operation
Shopping malls/office buildings: This type of building has a large flow of people, and large-scale industrial air conditioners are needed for indoor cooling. The heat emitted by this type of air conditioner is dozens or even hundreds of times that of ordinary air conditioners. Therefore, it is necessary to use chillers to cool down its equipment to ensure normal operation and cooling in the house.
Product Feature
1、Our industrial scroll chiller adopts modular design and can be convenient for installation and use.
2、The unit is equipped with standard unit modules for combination, which is convenient for engineering design and selection.
3、Core components are from world famous brand to ensure best quality
4、Hermetic scroll compressor and semi hermetic screw compressor ensure strong liquid hammer resistance, high volumetric efficiency and energy efficiency ratio.
5、The single module unit is controlled by microcomputer, and the multi module unit is controlled by PLC.
6、High efficiency, energy saving and longevity life
7、Automatic defrosting
Ending
The above is the information about the air-cooled vortex water cooler. This equipment is widely used in various large shopping malls, office buildings, factories and other scenarios. It can be used for cooling the equipment well and at the same time guarantees the service life of the equipment. If you have more questions about product selection and professional knowledge, you can contact Feizhong at any time, and we can provide you with perfect solutions and information.
