XC series ultrasonic industrial humidifier has no mechanical drive, no noise interference, no pollution during atomization, high atomization efficiency, low failure rate and low energy consumption. It is an efficient, reliable and practical ultrasonic industrial humidification equipment.
Working principle of ultrasonic humidifier:
Ultrasonic series humidifier products adopt high-frequency electronic oscillation circuit, and the ultrasonic energy generated by the transducer sheet directly acts on the water, and the water is atomized under the strong ultrasonic cavitation. It is atomized into fine water particles with a diameter of only 1-5 μm, which are blown to the humidification space through a unique air duct, and the water mist particles exchange heat and moisture with the flowing air to achieve the purpose of equal-enthalpy humidification of the air.
Ultrasonic atomizing humidifiers are designed to be used in two ways. It can be hung on the external wall, and the rubber wheels can also be replaced to adapt to the use under different conditions. The humidifier is designed with the functions of no water protection, automatic water inlet when power on, and automatic water level control.
Description of system performance characteristics:
1. The diameter of the mist particles produced by the ultrasonic humidifier is only 1-5 μm, which can be absorbed by the air. The humidification efficiency is close to 100%. The particles are small and uniform, and can be transported over long distances. The air is humidified without dripping water. The PVC pipe of φ110mm is selected To transport water mist, a single PVC pipe can transport water mist to a distance of 40-50m without using a nozzle, so there is no trouble of clogging the nozzle.
2. The energy consumption index per unit of humidification is low, the energy consumption is only 0.05kw/(kg.w), which is equivalent to 1/10-1/15 of other humidification methods, and the operating cost is low.
3. Adopt the world's most advanced atomization technology and integrated atomization components, original design to prevent fan from splashing water, anti-leakage design of mist outlet, easy-to-clean design and water shortage protection device, plus 60,000 hours of high life imported from Taiwan Needle bearing fan ensures excellent humidification quality and reliable performance.
4. There is no mechanical drive or high-power motor when the humidifier atomizes. It is not purely mechanical energy driven humidification, no compressed air is needed, no noise interference, and no pollution. The failure rate is low, and it is an energy-saving and environment-friendly humidifying equipment. It is efficient, reliable and practical, and is your ideal choice.
5. The size of the model is small, and it can be a separate system according to the site conditions. It is not only suitable for the supporting installation of the new factory building, but also can be used to upgrade the old factory building without destroying the original equipment, so as to meet the humidity requirements of the production process.
6. The company has mature technology and rich experience in the field of ultrasonic humidifiers, and its products are exported to Japan, South Korea, Thailand, Malaysia, Indonesia, Syria, Uzbekistan, Indonesia and other countries.<
